The iP-2 Dual System
For Acoustic Guitars
£137.00
Combine the Highlander Pickup System with a second transducer, such as an internal condenser microphone or a magnetic, sound hole pickup, and enhance your sound. (The mic or magnetic pickup is plugged into the Access Jack which provides power if required).
The Signal from the iP-2 Pickup System is connected to the tip of the stereo output jack, while the signal from the second sound source is connected to the ring. Having both signals available separately, you can use different sound systems for each pickup or combine both signals with a stereo preamplifier or mixer such as our Pro Acoustic Mix DI.
Split Pickup for Acoustic Guitar with a Split Bridge
Highlander's 'Split Pickup' offers two pickups attached to an iP-1 or iP-2 preamplifier for use with guitars that have split saddles. In some instances our flexible standard pickup can be routed to fit a split saddle.
For those instances where this is not possible, our split saddle option is the perfect solution.
This is a very reliable, time tested system. Highlander Split Pickups that were installed in guitars over 12 years ago, sound as good today if not better than they did when they were first installed.
To order ask for the "iP-1 Split"or "iP-2 Split".
Also available: Microphone adapters & Volume Control - iP-2 V
iP-2 Split - Split Saddle Option - £170.00